PFR32-312 Powerflex Rear Radius Arm to Chassis FOR Land Rover

  

PFR32-312 Powerflex Rear Radius Arm to Chassis FOR Land Rover. PFR32-312 Powerflex Rear Radius Arm to Chassis fit Land Rover. PLEASE LOOK TO IDENTIFY AND THEN SEARCH FOR THE RELEVANT PART NUMBER IN OUR SHOP. GET THE CORRECT PART FIRST TIME. PLEASE MAKE SURE YOU CHECK THE NOTES SECTION TO THE LEFT OF COMPATIBILITY TABLE.

IF IN ANY DOUBT PLEASE ADVISE A REG NO OR ASK SO YOU GET THE CORRECT PART FIRST TIME. These are all common ailments when you are using'softy' rubber compound suspension bushes. POWERFLEX BUSHES will relieve your sheepishness and remove your feelings of being fleeced - the new uprated. Greater Cost-Effectiveness No special tools are needed, and applications (that are constantly being added to) are available on a wide range of new and older popular models.

Should you also require any other Suspension bush, please. Road Series - for Road and fast Road use. POWERFLEX Road Series bushes improve your cars' road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance.

Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Our Road bushes offer Prolonged tyre life, Improved performance, Increase safety, Greater cost-effectiveness.

Black Series - for Track and Motorsport use. POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

Heritage Collection - for Classic and Restoration use. POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush. Our new range speaks to the growing demand for quality replacement parts that have an aesthetic in keeping with' the look of the original part and restoration project as a whole whilst carrying all of the performance and longevity benefits offered by Powerflex's unique blend of polyurethane. Our materials are colour coded to make them easily identifiable.

Used for our Universal exhaust mounts and diesel engine mounts. Mainly used for engine mounts, diff mounts and subframe mounts or areas where the bush needs a lot of movement and absorption.

This is used in most areas of the suspension and provides the right mix between performance and compliance. This is used for our Black Series range or on normal road vehicles where the vehicles suspension demands require us to use this hardness of material i. In areas of high load. Many thanks for your interest.

We pride ourselves on a quality service and we are happy to address any concerns.