- Index
- Brand
- Cpu
- Manufacturer
- Apec (2)
- As-pl (13)
- Blackbox (3)
- Bm Catalysts (4)
- Bmw (3)
- Borg & Beck (2)
- Bosch (9)
- Bremi (3)
- Champion (2)
- Esen Skv (2)
- Febi Bilstein (7)
- For Land Rover (2)
- Land Rover (127)
- Land Rover Various (2)
- Land Rover, Tvr (2)
- Range Rover (5)
- Range Rover 2.5 Dhse (2)
- Rover (143)
- Tedgum (2)
- Vaico (2)
- ... (4513)
- Ram
- Resolution
- Type
- Abs Component (8)
- Alternator (13)
- Brake Disc Rotor (20)
- Brakes (13)
- Bumper (13)
- Cd Player (11)
- Complete Alternator (9)
- Engine Gasket (7)
- Exhaust (13)
- Exhausts (9)
- Four Wheel Drive (51)
- Interior (10)
- Light Bar (17)
- Rotating Electrics (9)
- Shock (8)
- Side Steps (7)
- Starter (10)
- Suspension (12)
- Wheel Rim (11)
- Wheel Set (114)
- ... (4485)
Range Rover P38 to L322 Rear tailgate conversion kit body moulding panel upgrade
Tailgate Conversion Panel (Fibre glass panel only). Range Rover P38 upto 2002.
This is a conversion panel that allows you to change your P38 tailgate to look like the L322 tailgate. The tailgate conversion is simply a matter of removing the light assemblies from the tailgate and then bonding on the supplied over panel that covers down to the lower ridge line (about 2 from the bottom of the tailgate). This panel is designed to take the L322 reversing lights (not supplied but available from LandRover - or see our other listings for these). The tailgate release switch remains in place. We no longer sell the rear light panel kits, so if you are planning to fit this tailgate you will need to design your own solution for the L322 rear lamps. Most people modify the P38 wings and wiring and fit the L322 rear lamps to complete the L322 look.This listing is for the fibreglass tailgate panel only. 1 x Lower Tailgate over panel molded from fiberglass designed to accept L322 reversing lamps. PU bonding compound or similar to bond on tailgate panel. 2 x Genuine Range Rover L322 reversing light units (Left PN XFD000053 and Right PN XFD000043). See our other items for these.
Paint to paint the parts as required. L322 Rear Lamps - which will require wing and wiring modification. The tailgate panel is a bond over panel - no cutting needed - just remove the original lights and bond on this over panel. Some adjustment of the rear tailgate catch may be needed - fitting a washer under the catch is one solution. Which Vehicles will this fit? Fit all of the Range Rover P38 models up to 2002.POWERFUL UK Ltd Stock a full range of polished stainless steel trim accessories for the Range Rover L322, Range Rover Sport and P38 Range Rover. Please ensure that you check all items carefully for damage / missing items before taking to a third party for fitting. Powerful UK Ltd shall have no liability for any additional fitting costs incurred by the customer in connection with fitting faulty parts. Please ensure that you check the fit of an item carefully before painting or modifying in any way. All fitting instructions and videos provided by Powerful UK Ltd are for advice and guidance only and should only be followed once an assessment has been made by the operator of the task, vehicle compatibility, impacts on safety etc.
Powerful UK Ltd shall have no liability for any issues or damage caused when fitting our parts. Powerful UK Ltd will not be responsible for any errors or omissions or for the results obtained from the use of such information. To the full extent allowed by applicable law, Powerful UK Ltd will not be liable to the user/or any third party for any consequential or incidental damages (including but not limited to loss of revenue, loss of profits, loss of anticipated savings, wasted expenditure, loss of privacy and loss of data) or any other indirect, special or punitive damages whatsoever that arise out of or are related to the use or fitting of any supplied parts.For full Terms and Conditions please see our website. We are a family run business based near Swindon in Wiltshire.
We are a private limited company, incorporated in October 2001. We design and manufacture a range of 4x4 parts and accessories and supply to both the trade and public. We pride ourselves on offering excellent customer service and always welcome comments & feedback on our products. VAT REGISTERED - Full VAT invoice - if you need a company name on invoice - just ask.REGISTERED UK LTD COMPANY - Company registration number 4310157. Connect with us on Facebook. International terms and conditions of sale.
It is the responsibility of the customer to pay all charges of this nature. The item "Range Rover P38 to L322 Rear tailgate conversion kit body moulding panel upgrade" is in sale since Friday, November 18, 2016. This item is in the category "Vehicle Parts & Accessories\Car Tuning & Styling\Body & Exterior Styling\Other Exterior Styling".
The seller is "powerful_uk_ltd" and is located in UK Mail Order . This item can be shipped to United Kingdom.
- ISBN: does not apply
- UPC: does not apply
- EAN: does not apply
- Brand: Powerful UK Ltd
- Manufacturer Part Number: RRK810-tailgate
- Type of Sale: Outright Purchase